GOW INDUSTRIAL CORP LIMITED

Gowe Cross Hatch Adhesion Tester Cross-cut Cross Cut Testes, 1mm 11 Cuts, Plasti

$395.01
DISCOUNTS
31ipf1d1jel._sl1500_
1 of 2
Payment options
Amazon Pay
Shipping options
Estimated to arrive by Monday, May 15th

Estimated delivery date is Monday, May 15th. This estimate is based on:

  • The seller's handling time
  • Economy shipping (1 to 10 business days) transit time to US

Actual delivery times may vary. The item could arrive as early as Monday, May 8th or as late as Friday, May 19th.

Free via Economy shipping (1 to 10 business days) to United States
Quantity Available
37 in stock

Item details

Condition
New
MPN
Gowe
UPC
519256057589
binding
Misc.
format
Misc.
manufacturer
Gowe
part_number
Gowe
Brand
Gowe
ean
0519256057589

About this item

ASTM method D3359 requires 11 cut lines:
1 mm cutter for films up to 50 m (2 mils) thick
2 mm cutter for films between 125 m (2~5 mils) thick
ISO standards prescribe that the number of cuts shall be 6, and that the cut in each direction must be according to the film thickness and type of coating used as shown below:
0-60m 1 mm space for hard substrates (metal)
0-60m 2 mm space for soft substrates (plastic)
61-120m 2 mm space for hard or soft substrates
121-250m 3 mm space for hard or soft substrates
Packing List:
1,Carrying case
2, Cross Hatch Cutter & Handle
3, 1 roll of 3M Scotch Transparent Tape
4, Brush
5, Magnifier
Procedure
-Make a lattice pattern in the film with the appropriate tool, cutting to the substrate
-Brush in diagonal direction 5 times each, using a brush pen or tape over the cut and remove with Permacel tape
-Examine the grid area using an illuminated magnifier.

Don't buy others' fakes. Only buy from Gowe Industrial can enjoy after-care service.

The Cross Hatch test is widely used in various forms to assess adhesion of paint coatings. This cutter has advantages over single cutting blades for both safety and simplicity in use, available with 1, 2 or 3mm spaces between cutting edges. Complies with BS 3900 E6, ASTM D 3359, BS/DIN EN ISO 2409.

This method is used for determining the parallel groove paint adhesion of one or many layers on a substrate, generally a metal panel. Thiss Cross-Cut Tester is a multi-cut blade with 6 cutting edges. The Cross Cut blades are made of hardened steel alloy and are designed for retaining a sharp cutting edge to reduce the frequency of blade replacement.

Packing List: Carrying case; Cross Hatch Cutter & Handle; 1 roll of 3M Scotch Transparent Tape; Brush; Magnifier; Certificate of Conformity (if requested); Procedure: -Make a lattice pattern in the film with the appropriate tool, cutting to the substrate; -Brush in diagonal direction 5 times each, using a brush pen or tape over the cut and remove with Permacel tape; -Examine the grid area using an illuminated magnifier.

ASTM method D3359 requires 11 cut lines: 1 mm cutter for films up to 50 µm (2 mils) thick; 2 mm cutter for films between 125 µm (2~5 mils) thick; ISO standards prescribe that the number of cuts shall be 6, and that the cut in each direction must be according to the film thickness and type of coating used as shown below: 0-60µm, 1 mm space for hard substrates (metal); 0-60µm ,2 mm space for soft substrates (plastic) ; 61-120µm, 2 mm space for hard or soft substrates; 121-250µm,3 mm space for hard or soft substrates
Additional Details
------------------------------
Package quantity: 1